Milton CAT 904H - Manual (Page 7)

7
904H Compact Wheel Loader Specifications
Engine
Model MHI S4Q2-T
Gross Power 41 kW 55 hp
Net Power 39 kW 52 hp
SAE J1349 Rating 39 kW 52 hp
ISO 9249 Rating 39 kW 52 hp
EEC 80/1269 Rating 39 kW 52 hp
Bore 88 mm 3.5 in
Stroke 103 mm 4 in
Displacement 2.505 L 153 in 3
Engine meets Interim Tier 4 emissions
regulations.
Rated power at 2,400 rpm.
Weights
Operating Weight 4490 kg 9,900 lb
•
•
Operating Specifications
Tire Size 12-16.5, 10PR
Rated Bucket Capacity 0.6 m 3 0.8 yd 3
Breakout force 35.6 kN 8,003 lb
Rated operating load
@ full turn, bucket 1250 kg 2,756 lb
Straight tipping load,
bucket 3000 kg 6,614 lb
Full turn static tipping
load, bucket 2500 kg 5,511 lb
Rackback, transport
position 49 Degrees
Rated operating load 1600 kg 3,527 lb
@ full turn, forks
(EN 474-3:2006, firm and level ground,
500 mm (20 in) load center) (80% of FTSTL)
Rated operating load 1200 kg 2,646 lb
@ full turn, forks
(EN 474-3:2006, rough terrain, 500 mm
(20 in) load center) (60% of FTSTL)
Specifications shown are for the 904H with
cab, 75 kg (165 lb) operator and general
purpose bucket.
Transmission
Travel Speed 1 7 km/h 4.3 mph
Travel Speed 2 20 km/h 12.4 mph
•
Cab
ROPS SAE J1040 MAY94,
ISO 3471:1994
FOPS SAE J/ISO 3449
APR98 Level I and II;
ISO 3449:1994 Level I
and II
Hydraulic System
Main relief 207 bar 3,000 psi
3rd valve flow 83 L/min 22 gal/min
Hydraulic cycle time
– lift 4.5 seconds
Hydraulic cycle time
– dump 0.8 seconds
Hydraulic cycle time
– lower, float 3.2 seconds
Service Refill Capacities
Cooling System 8 L 2 gal
Fuel tank 83 L 22 gal
Hydraulic system 43 L 11 gal
Engine Oil 7.5 L 2 gal
Buckets
Bucket Capacities 0.6 m 3 -
1.0 m 3
0.8 yd 3 -
1.3 yd 3