Milton CAT 980H - Manual (Page 18)

18 980H Wheel Loader specifications
Transmission
Forward 1 6.6 km/h 4.1 mph
Forward 2 11.8 km/h 7.3 mph
Forward 3 20.7 km/h 12.9 mph
Forward 4 36.3 km/h 22.6 mph
Reverse 1 7.6 km/h 4.7 mph
Reverse 2 13.5 km/h 8.4 mph
Reverse 3 23.6 km/h 14.7 mph
Reverse 4 41.5 km/h 25.8 mph
• Maximum travel speeds (29.5-25 tires).
Hydraulic System
Bucket/Work Tool System – 464 L/min 123 gal/min
Pump Output
Bucket/Work Tool System – 20 700 kPa 3,000 psi
Relief Valve Setting
Hydraulic Cycle Time – Raise 6 Seconds
Hydraulic Cycle Time – Dump 2.1 Seconds
Hydraulic Cycle Time – 3.4 Seconds
Lower, Empty, Float Down
Hydraulic Cycle Time – Total 11.5 Seconds
Pilot System – Pump Output 464 L/min 122.58 gal/min
• Implement System (Standard), Gear-Type Pump –
Rated at 2,100 rpm and 6900 kPa (1,000 psi).
Brakes
Brakes Meets required standards.
• Meet OSHA, SAE J1473 OCT90 and ISO 3450-1996 standards.
Axles
Front Fixed front
Rear Oscillating ±13°
Maximum Single-Wheel 550 mm 21.7 in
Rise and Fall
Engine
Engine Model Cat ® C15 ACERT™
Gross Power – SAE J1995 293 kW 393 hp
Net Power – ISO 9249 260 kW 349 hp
Net Power – SAE J1349 260 kW 349 hp
Net Power – 80/1269/EEC 263 kW 353 hp
Peak Torque (Net) @ 1,200 rpm 1619 N·m 1,244 ft-lb
Bore 137 mm 5.4 in
Stroke 171.5 mm 6.75 in
Displacement 15.2 L 928 in 3
• Caterpillar engine with ACERT Technology – EPA Tier 3,
EU Stage III Compliant
• These ratings apply at 1,800 rpm when tested under the
specified standard conditions.
• Power rating conditions for net power advertised is the
power available when the engine is equipped with alternator,
air cleaner, muffler and on-demand hydraulic fan drive at
maximum fan speed.
Weights
Operating Weight 30 519 kg 67,294 lb
• For 5.7 m 3 (7.5 yd 3 ) general purpose bucket with BOCE
Buckets
Bucket Capacities 3.8-6.1 m 3 5.0-8.0 yd 3
Max Bucket Capacity 6.1 m 3 8 yd 3
Operating Specifications
Static Tipping Load, Full Turn 19 496 kg 42,989 lb
Breakout Force 199 kN 44,775 lb
• For 5.7 m 3 (7.5 yd 3 ) general purpose bucket with BOCE