Milton CAT G200LG4 200kW_250kVA 21 Light Remote Annunciator - Manual (Page 2)

Specifications
Surface Mount Annunciator
21 Light Remote Annunciator
Flush Mount Annunciator
Function Color Alarm Latched
Pre-low Oil Pressure Yellow Yes Yes
Pre- High Water Temp Yellow Yes Yes
Pre Low Water Temp Yellow Yes Yes
Pre- Low Fuel Yellow Yes Yes
Battery Chrg AC Fail Yellow Yes No
Low Battery Voltage Yellow Yes No
High Battery Voltage Yellow No No
Not in Auto Red Yes No
RPM Sensor Loss Red Yes Yes
Overcrank Red Yes Yes
Over speed Red Yes Yes
Low Oil Pressure Red Yes Yes
Hi Water Temp Red Yes Yes
Lo Water Level Red Yes Yes
Emergency Stop Red Yes No
Gen Running Yellow No No
Gen Power (ATS) Yellow No No
Line Power (ATS) Green No No
Systems Ready Green Yes No
Communications OK Green Yes No
Spare Green No No
Spare Keypad Switch - Can be used to implement a remote start function. (Model 005464 only)
5.8
4.53 0.812 Dia.
0.812 Dia.
Both sides
0.86
9.06 1.64
2.32
6.49
11.42
8.27
9.64
Outside
Cut
Rough Opening
6.75 " x 9.88 "
Four mounting holes for
21 Light Annunciator
4-mm -0.7 Female Thread
1.57
Thru
R0.59
Both Sides
1.93
10.24
7.09
1.21
1.42
0.87
The 21 Light Annunciator can mount to
a flat surface with connections through
the 0.812 Dia knockout on the back
surface or through 0.812 knockouts on
sides as shown.
This Flush Mount Box is recessed
into the wall opening and the sur-
face mount annunciator mounts to
the (4) 4 mm screw holes on the
back surface. After wire connec-
tions are made the front annuncia-
tor cover is attached.
Information contained in this publication may be considered confidential.
Discretion is recommended when distributing.
Materials and specifications are subject to change without notice.
CAT, CATERPILLAR, OLYMPIAN, their respective logos and ''Caterpillar Yellow'', as well as corporate and product
identity used herein, are trademarks of Caterpillar and may not be used without permission.
www.CAT-ElectricPower.com
© 2009 Caterpillar
All rights reserved.
Printed in U.S.A. LEHF0040-00 (06/09)