Milton CAT 914G2_IT14G2 - Manual (Page 15)

IT14G2 Dimensions with Forks
All dimensions are approximate.
1
mm ft/in
1 586 1'11"
2 1490 4'11"
3 745 2'5"
3708 12'2" 4
5
1808 5'11"
34 1.3"
Dimensions vary with fork length.
6
2
Refer to Operating Specifications
chart below.
4
3
5
6
*Static tipping and operating weights shown are for an IT14G2 with lubricants, full fuel tank, ROPS cab, 80 kg (176 lb) operator, standard
250 kg (550 lb) counterweight and 17.5-R25 (L2 equivalent) tires.
Tipping load is defined by SAE J732.
IT14G2 Operating Specifications with Forks
Fork Tine Length 1050 mm (3'5") 1200 mm (3'11") 1350 mm (4'5")
Operating load:
Per SAE J1197 FEB91 kg 1927 1870 1810
(50% of full turn static tipping load) lb 4,249 4,123 3,991
Per CEN 474-3, rough terrain kg 2312 2244 2172
(60% of full turn static tipping load) lb 5,098 4,948 4,789
Per CEN 474-3, firm and level ground kg 3082 2992 2896
(80% of full turn static tipping load) lb 6,796 6,597 6,386
Overall length mm 6723 6873 7023
ft/in 22'1" 22'7" 23'1"
Load center mm 525 600 675
in 21" 24" 27"
Static tipping load with level arms and forks, kg 4447 4309 4179
600 mm (23.6 in) load center, straight* lb 9,806 9,501 9,215
Static tipping load with level arms and forks, kg 3853 3734 3620
600 mm (23.6 in) load center, full 40° turn* lb 8,496 8,233 7,982
Operating weight* kg 7898 7915 7928
lb 17,415 17,453 17,481
15