Milton CAT 994F - Manual (Page 28)

28 994F Wheel Loader specifications
kg lb
BUCKETS
Spade Edge
NARROW – 5650 mm (222 in)
Rock – 14 m 3 (18.5 yd 3 ) (J800) 18 338 40,429
Rock – 15 m 3 (19.5 yd 3 ) (J800) 18 481 40,744
Rock – 17 m 3 (22.5 yd 3 ) (J800) 18 217 40,162
Rock – 19 m 3 (25 yd 3 ) (J800) 20 197 44,526
WIDE – 6220 mm (245 in)
Rock – 18 m 3 (23.5 yd 3 ) (J800) 20 167 44,460
Rock – 19 m 3 (25 yd 3 ) (J800) 20 444 45,072
Straight Edge
Coal – 32 m 3 (42 yd 3 ) (J700) 20 167 44,460
Serrated Edge
Coal – 36 m 3 (47 yd 3 ) (none) 20 444 45,072
GROUND ENGAGING TOOLS
BUCKET TIPS*
Heavy duty – long – rock (J800) 88 193
Heavy duty – abrasion – rock (J800) 105 232
Heavy duty – penetration – rock (J800) 97 214
Penetration – rock (J800) 54 120
Heavy duty – long – coal (J700) 51 113
Heavy duty – abrasion – coal (J700) 66 145
BUCKET WINGS
Low profile 350 772
* * Requires multiple quantities.
** Available mid-2005.
kg lb
POWER TRAIN
Crankcase guard 300 662
Engine prelube 1 3
Engine oil renewal system 66 145
Sy-Klone turbine precleaner 11 25
RIMS
914 mm (36") wide 1813 3,996
1118 mm (44") wide
with 126 mm (6") flange 1925 4,245
1194 mm (47") wide
with 126 mm (6") flange 1930 4,255
ELECTRICAL
CAES, attachment ready 23 50
VIMS, wireless II 0 0
Camera, rear vision 2 4
OTHER
Cab precleaner 2 5
Product Link** 1 3
Optional Equipment
With approximate changes in operating weights.
Optional equipment may vary. Consult your Caterpillar dealer for specifics.
kg lb
LIFT ARRANGEMENTS
Standard 0 0
High Lift 3186 7,024
Super High Lift 17 729 39,085
FUEL LINES
No heater 0 0
With heater 6 13
Cold weather starting 32 71
kg lb
RIMS
914 mm (36") wide 0 0
1118 mm (44") wide
with 126 mm (6") flange 428 944
1194 mm (47") wide
with 126 mm (6") flange 459 1,012
STARTERS
Air start, turbine, Ingersoll 0 0
Air start, turbine, TDI 0 0
Electric- not recommended in ambient
temperatures below 0° C (32° F) 0 0
Mandatory Attachments
(select one from each group)
Mandatory and optional equipment may vary. Consult your Caterpillar dealer for specifics.