Altronix NetWay112 Installation Instructions User Manual
Page 4
- 4 -
NetWay112
Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
website: www.altronix.com, e-mail: [email protected], Lifetime Warranty, Made in U.S.A.
IINetWay112
L07L
MEMBER
Maintenance:
Unit should be tested at least once a year for the proper operation as follows:
While the NetWay112 is powered and the output is connected to a suitable UL Listed PoE device.
The NetWay112 should be tested for PoE shutdown operation (For Information Technology applications only).
For Access Control applications, the NetWay1SP is to be tested as part of a complete Access Control System and in
accordance with listed Access Control Devices.
Troubleshooting:
Refer to NetWay112 Port Status and LED Flash Codes pg. 2.
Technical Specifications:
Parameter
Description
No. of Ports
One (1).
Input power requirements
12VDC @ 1.6 amp.
Indicators
Port Status LED.
PoE Shutdown Voltage
and Current Range
5VDC to 24VDC or 12VAC to 24VAC.
Maximum current: 2mA for 5VDC.
Maximum current for higher voltages: 10mA.
Environmental Conditions Operating Ambient Temperature: Information Technology - 32ºF to 104ºF (0ºC to 40ºC).
Access Control - 32ºF to 120.2ºF (0ºC to 49ºC).
Relative humidity: 85%, +/ --- 5%.
Storage Temperature: --- 4º to 158ºF (--- 20º to 70ºC) Storage.
Operating Altitude: --- 1000 to 10,000 ft. (--- 304.8 to 3048m).
Regulatory Compliance
CE approved