beautypg.com

Altronix eBridge16CR Installation Instructions User Manual

Page 7

background image

eBridge16CR

- 7 -

Mounting Options:

Fig. 7

Rack Mount Installation

1- Remove and discard factory installed screws from both sides of rack chassis (Fig. 7a).
2- Install mounting brackets (A) on the left and right side of rack chassis using the
four (4) flat head screws (B) (included) (Fig. 7b).
3- Place unit into desired EIA 19” rack position and secure with mounting screws (not included) (Fig. 7c).

Fig. 8

Shelf Installation

1- Position and affix rubber pads (C) (included) at each
corner on the bottom of the unit (Fig. 8).
2- Place unit in desired location.

B

A

C

Mounting Hardware

(Included):

C

A

B

Fig. 7b

Fig. 7a

Fig. 7c

Top

Top

Top

Front
Left

Front

Left

Front Left

Left Side

Rubber Pad

Two (2) mounting brackets

Six (6) flat head screws
for mounting brackets.

Four (4) rubber pads.

Remove