VEGA INSYS Modem GPRS 5.0 User Manual

Page 70

Functions

INSYS GPRS 5.0 serial

Alternatively, our example can be set using the terminal program:

In this example, you must note the order of the AT
commands!

Automatic activation of SMS dispatch

AT**INPUT1=1

for input 1; if you want to use only 1

switch input, use input 1.

AT**INPUT2=1

for input 2.

Set SMS storage locations

AT**INPUT1=1

AT**INPUT1=2

AT+CPMS=MT,MT,MT

Activate SMS text mode

AT+CMGF=1

Delete SMS storage location 1 preliminary,
AT+CMGD=2

for storage location 2. You must delete

this storage location, if you want to trigger an SMS via
the second input.

AT+CMGD=1

AT+CMGD=2

The SMS service center number of the network provider
(may be omitted if the number is stored on the SIM card).

AT+CSCA=

Enter the destination phone number

Wait for the prompt “>”, enter the text

The SMS is saved using the key stroke combination
Ctrl+Z.

If you trigger an SMS via input 2, you continue entering
the text for the SMS 2.

With AT+CMGL=ALL, you can check if the messages were
stored correctly and in the correct order.

AT+CMGW=

> 1>

AT+CMGW=

> 2>