VEGA INSYS Modem GPRS 5.0 User Manual

Page 11

INSYS GPRS 5.0 serial

Utilization Notes

3 Utilization Notes

• This manual uses the symbol

for especially important notes. Further notes will

be marked accordingly.

• All factory settings are marked “default”.

• In Chapters 4.6 to 7 the description consists of two columns. Individual functions

are described on the left side. The according AT commands and the modem re-
sponses can be found in the right column.

Function description

command

Example:
Dialing IP 192.168.0.2 and port 1234

ATD192.168.0.2:1234

All AT commands start with the letters AT and end with a “Return” (Carriage Re-
turn - CR). AT commands can be entered in capital or small letters. The command is
processed after the modem received a CR input.

• In the following, the used syntax is explained:

ATD

command (font: Courier, bold)

Input of a parameter
(font: Courier, bold)

[expression

]

Input of an optional parameter
(font: Courier, bold)

expression

Response from the modem
(font: Italic)

Examples:

ATD:

Dialing the IP address :

ATD192.168.0.1:1234

Dialing the IP address 192.168.0.1 and
the IP port 1234

AT**CALLBACK=0,2,0

The phone number that was stored with
AT**CLIP2

is assigned the action “IP Call-

back”.

+COPS=[,,]

Select network provider and login

AT+COPS=0

Select network provider automatically and
login

AT+COPS=4,2,26201

Select network pr ovi der (Vodaf one) m anually an d login