VEGA VEGAFLEX 82 4 … 20 mA_HART four-wire - Manual (Page 37)

37
6 Set up with the display and adjustment module
VEGAFLEX 82 • 4 … 20 mA/HART - four-wire
41830-EN-130314
In this menu item, you define the indication of the measured value
on the display. You can display two different measured values. In this
menu item, you define measured value 1.
The default setting for the displayed value 1 is "Filling height Level".
In this menu item you can define the indication of the measured value
on the display.
You can display two different measured values. In this menu item, you
define measured value 2.
The default setting for the displayed value 2 is the electronics tem-
perature.
The optionally integrated background lighting can be adjusted via the
adjustment menu. The function depends on the height of the supply
voltage, see "Technical data".
The lighting is switched off in the delivery status.
In this menu item, the device status is displayed.
The respective min. and max. measured value is saved in the sen-
sor. The two values are displayed in the menu item "Peak values,
distance".
In another window you can reset the peak value.
Display - Displayed value
1
Display - Displayed value
2
Display - Backlight
Diagnostics - Device
status
Diagnostics - Peak values
Distance