VEGA VEGAFLEX 86 Foundation Fieldbus - Manual (Page 23)

23
4 Mounting
VEGAFLEX 86 • Foundation Fieldbus
44233-EN-130910
1
2
Fig. 13: Mounting the instrument on insulated vessels.
1 Temperature insulation
2 Ambient temperature on the housing
If there is a risk of the cable probe touching the vessel wall during
operation due to product movements or agitators, etc., the measuring
probe should be securely fixed.
In the gravity weight there is an internal thread (M8), e.g. for an eye-
bolt (optional) - (article no. 2.1512).
Make sure that the probe cable is not completely taut. Avoid tensile
loads on the cable.
Avoid undefined vessel connections, i.e. the connection must be
either grounded reliably or isolated reliably. Any undefined change of
this requirement can lead to measurement errors.
Fasten