5 corresponding source container – VEGA MINITRAC 31 Foundation Fieldbus User Manual
Page 11

11
3 Product description
MINITRAC 31 • Foundation Fieldbus
41782-EN-131119
The VEGADIS 81 is an external display and adjustment unit for VEGA
plics
®
sensors.
For sensors with double chamber housing the interface adapter "DIS-
ADAPT" is also required for VEGADIS 81.
You can find further information in the operating instructions "VE-
GADIS 81" (Document-ID 43814).
The electronics module PT30E.XX is a replacement part for radiation-
based sensors MINITRAC 31.
The electronics module can only be exchanged by VEGA service
technician.
For mounting MINITRAC 31 holders as well as special mounting ac-
cessories are available. Please contact our sales department.
3.5 Corresponding source container
A radioactive isotope in a suitable source holder is the prerequisite for
a radiation-based measurement setup.
The handling of radioactive substances is regulated by law. The radia-
tion protection rules of the country in which the system is operated
apply first and foremost.
In Germany, for example, the current radiation protection ordinance
(StrlSchV) based on the Atomic Energy Law (AtG) applies.
The following points are important for measurement with radiation-
based methods:
A handling permit is required for operation of a system using gamma
rays. This permit is issued by the respective government office or the
responsible authority (in Germany, for example, offices for environ-
mental protection, trade supervisory boards, etc.)
You can find further instructions in the operating instructions manual
of the source container.
When handling radioactive sources, unnecessary radiation exposure
must be avoided. An unavoidable radiation exposure must be kept as
low as possible. Take note of the following three important measures:
VEGADIS 81
Electronics module
Mounting accessory
Handling permit
General instructions for
radiation protection