VEGA VEGAFLEX 86 Modbus and Levelmaster protocol - Manual (Page 53)

53
7 Setting up sensor and Modbus interface with PACTware
VEGAFLEX 86 • Modbus and Levelmaster protocol
41848-EN-130314
Fig. 26: Select quick setup
1 Quick setup
2 Extended adjustment
3 Maintenance
Quick setup
With quick setup you can carry out the parameter adjustment of
VEGAFLEX 86 for your application in just a few simple steps. The
assistant-driven adjustment includes the basic settings for simple,
reliable setup and commissioning.
Information:
If the function is inactive, then possibly no instrument is connected.
Check the connection to the instrument.
Extended adjustment
With the extended adjustment, you carry out the parameter adjust-
ment for the instrument via the clear menu structure in the DTM
(Device Type Manager). This enables additional and special settings
over and above those offered by quick setup.
Maintenance
Under the menu item "Maintenance" you get comprehensive and
important support for servicing and maintenance. You can call up
diagnostic functions and carry out an electronics exchange or a
software update.
Click to the button "Quick setup", to start the assistant-driven adjust-
ment for a simplified and reliable setup.
Step 1 of 7
Instrument configuration
Start quick setup