VEGA VEGAFLEX 86 Modbus and Levelmaster protocol - Manual (Page 5)

5
Contents
VEGAFLEX 86 • Modbus and Levelmaster protocol
41848-EN-130314
Contents
1 About this document
1.1 Function ............................................................................. 7
1.2 Target group ....................................................................... 7
1.3 Symbolism used ................................................................. 7
2 For your safety
2.1 Authorised personnel ......................................................... 8
2.2 Appropriate use .................................................................. 8
2.3 Warning about incorrect use ............................................... 8
2.4 General safety instructions ................................................. 8
2.5 CE conformity ..................................................................... 8
2.6 NAMUR recommendations ................................................ 9
2.7 Environmental instructions ................................................. 9
3 Product description
3.1 Configuration .................................................................... 10
3.2 Principle of operation ........................................................ 11
3.3 Packaging, transport and storage ..................................... 14
3.4 Accessories and replacement parts ................................. 14
4 Mounting
4.1 General instructions ......................................................... 17
4.2 Instructions for installation ................................................ 17
5 Connecting to power supply and bus system
5.1 Preparing the connection ................................................. 24
5.2 Connection ....................................................................... 25
5.3 Wiring plan ....................................................................... 26
5.4 Switch-on phase ............................................................... 27
6 Set up with the display and adjustment module
6.1 Adjustment volume ........................................................... 28
6.2 Insert display and adjustment module .............................. 28
6.3 Adjustment system ........................................................... 29
6.4 Parameter adjustment - Quick setup ................................ 30
6.5 Parameter adjustment - Extended adjustment .................. 32
6.6 Saving the parameter adjustment data ............................. 48
7 Setting up sensor and Modbus interface with PACTware
7.1 Connect the PC ................................................................ 50
7.2 Parameter adjustment with PACTware .............................. 51
7.3 Set up with the quick setup ............................................... 52
7.4 Saving the parameter adjustment data ............................. 57
8 Set up with other systems
8.1 DD adjustment programs ................................................. 58
8.2 Communicator 375, 475 ................................................... 58
9 Diagnostics and service
9.1 Maintenance .................................................................... 59
9.2 Diagnosis memory ........................................................... 59
9.3 Status messages .............................................................. 60
9.4 Rectify faults ..................................................................... 64