VEGA VEGAFLEX 81 HART - integrated accumulator - Manual (Page 36)

36
6 Set up with the display and adjustment module
VEGAFLEX 81 • HART - integrated accumulator
44640-EN-130430
In menu item "Interface (2)" you define the scaling format on the
display and the scaling of the interface measured value for 0 % and
100 %.
In menu item"Current output, size" you determine which measured
value the current output refers to.
In menu item "Current output, adjustment" you can assign a respec-
tive measured value to the current output.
In the menu item "Current output mode" you determine the output
characteristics and reaction of the current output in case of failure.
The default setting is output characteristics 4 … 20 mA, failure mode
< 3.6 mA.
In the menu item "Current output Min./Max.", you determine the reac-
tion of the current output during operation.
Setup/Scaling Interface
(2)
Setup/Current output
Size
Setup/Current output
Adjustment
Setup/Current output
mode
Setup/Current output
Min./Max.