beautypg.com

VEGA VEGAFLEX 81 HART - integrated accumulator User Manual

Page 13

background image

13

3 Product description

VEGAFLEX 81 • HART - integrated accumulator

44640-EN-130430

The composition of the upper medium must be stable, no varying

products or mixtures

The upper medium must be homogeneous, no stratifications

within the medium

Min. thickness of the upper medium 50 mm (1.97 in)

Clear separation from the lower medium, no emulsion phase, no

mull layer

If possible, no foam on the surface

Lower medium (L1)

The dielectric constant must be 10 higher than the dielectric

constant of the upper medium, preferably electrically conductive.

Example: upper medium dielectric constant 2, lower medium at

least dielectric constant 12.

Gas phase (L3)

Air or gas mixture

Gas phase - dependent on the application, gas pahse does not

always exist (d2 = 0)

The instrument is always preset to the application "Level measure-

ment".
For the interface measurement, you can select the requested output

signal with the setup.

3.3 Packaging, transport and storage

Your instrument was protected by packaging during transport. Its

capacity to handle normal loads during transport is assured by a test

based on ISO 4180.
The packaging of standard instruments consists of environment-

friendly, recyclable cardboard. For special versions, PE foam or PE

foil is also used. Dispose of the packaging material via specialised

recycling companies.

Transport must be carried out under consideration of the notes on the

transport packaging. Nonobservance of these instructions can cause

damage to the device.

The delivery must be checked for completeness and possible transit

damage immediately at receipt. Ascertained transit damage or con-

cealed defects must be appropriately dealt with.

Up to the time of installation, the packages must be left closed and

stored according to the orientation and storage markings on the

outside.
Unless otherwise indicated, the packages must be stored only under

the following conditions:

Not in the open

Dry and dust free

Not exposed to corrosive media

Protected against solar radiation

Output signal

Packaging

Transport

Transport inspection

Storage