VEGA VEGABAR 52 - climate compensated - Manual (Page 32)

Menu section Function Reset value
B asic settings U nit of measurement bar
T emperature unit °C
Z ero/Min. adjustment M easuring range begin
S pan/Max. adjustment M easuring range end
D ensity 1 kg/l
D ensity unit kg/l
D amping 1 s
L inearisation linear
S ensor-TAG S ensor
D isplay D isplayed value 1 bar
D isplayed value 2 %
D isplay unit V olume/l
S caling 0.00 to 100.0
D ecimal point indication 8888.8
S ervice C urrent output - characteristics 4 … 20 mA
C urrent output - failure < 3.6 mA
C urrent output - min. current 3.8 mA
C urrent output - max. current 20.5 mA
T he values of the following menu items are not reset with "Reset:
Menu section Function Reset value
B asic settings P osition correction no reset
D isplay L ighting no reset
S ervice SIL no reset
L anguage no reset
HART mode no reset
A pplication no reset
Factory setting
L
ike basic adjustment, furthermore special parameters are reset to
default values. 5)
Pointer
T
he min. and max. temperature or pressure values are each reset to
the actual value.
A dditional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
5) S pecial parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Optional settings
32 VEGABAR 52 • 4 … 20 mA/HART - climate compensated
6 S et up with the indicating and adjustment module PLICSCOM
35075
-EN
-081209