VEGA VEGABAR 52 - climate compensated - Manual (Page 26)

U nit of measurement
D ensity
0001000
kg/dm³
6 E nter the requested density value with [->] and [+], confirm with
[OK]
and move to position correction with [->].
T he adjustment unit is hence switched over from bar to m.
P roceed as follows to select the temperature unit: 2)
à Activate the selection with [OK] and select "Temperature unit
with [->].
à Activate the selection with [OK] and select the requested unit with
[->] ( e.g. °F).
à Confirm with [OK].
T
he temperature unit is hence switched over from °C to °F.
P roceed as follows:
1 A ctivate in the menu item "Position correction" the selection with
[OK] .
P osition correction
Off set
P =
+ 0000 mbar
53 mbar
2 S elect with [->], e.g. to accept actual measured value.
P osition correction
A ccept current measured
value?
▶ A ccept
E dit
3 C onfirm with [OK] and move to min.(zero) adjustment with [->].
P roceed as follows:
1 E dit the % value in the menu item "Min. adjustment" with [OK].
M in. adjustment
+000 .0 %
=
+0000 .0 mbar
0000.0 mbar
2 S et the requested percentage value with [+] and [->].
3 E dit the requested mbar value with [OK].
4 S et the requested mbar value with [+] and [->].
2) S election options: °C, °F.
Carry out position cor-
rection
Carrying out min. ad-
justment
26 VEGABAR 52 • 4 … 20 mA/HART - climate compensated
6 S et up with the indicating and adjustment module PLICSCOM
35075
-EN
-081209