VEGA VEGALOG 571 - Manual (Page 45)

VEGALOG 571 45
6 Supplement
6.1 Visualisation
With the visualisation program Visual VEGA
(VV), the measured values of the VEGA-
processing systems can be shown in
graphic and tabular form. Measured value
and status information are transferred via the
RS 232-interface of VEGACOM 557 or to
VEGALOG CPU-card to the PC. These
measurement loops can be collected into
groups. Direct comparison of several meas-
urement loops is then possible. Furthermore,
levels and fault signals are displayed.
6.2 Communication
By means of the interface converter VEGA-
COM 557, measured data and status infor-
mation of the CPU and the peripheral cards
can be collected and transferred digitally. In
order to do this, VEGACOM is plugged, like
a VEGALOG-card, into the carrier and has
direct access to the LOGBUS.
The collected data are converted to the fol-
lowing standard data formats:
- Siemens S5 (3964␣ R-procedure)
- MODBUS (RTU and ASCII)
- VEGA-ASCII
- Interbus S
- PROFIBUS FMS or DP.
It is, therefore, possible to integrate them
easily into existing control systems.
Supplement