Wiha Tools Product Catalogue 2012-2014 - Manual (Page 78)

155
www.wiha.com
154
Wiha flag and key handle.
The knack of applying just the right amount of pressure.
Innovative torsion blade in sizes T5 to T10
does not damage the expensive fastening
screws or the tool profile.
The small, 7-piece bench stand ensures
a tidy working environment.
The flag and key handles have large
support surfaces for thumb and index
finger for ease of use and efficiency.
Screwdrivers with flag or key
handles are used whenever
replacing indexable inserts
on milling heads. Thanks to the
large support area for thumb and
index finger, it is possible to loosen
or tighten any screw with comfort
by applying just the right amount
of pressure. These tools are also
particularly suitable for high-torque
adjustment work.
364 TORX ® driver with T-handle.
Blade: Chrome-vanadium steel, through hardened, chrome-plated.
Handle: Wiha Classic T-handle.
Application: For high torque transfer with minimal effort.
Extra: ChromTop ® blade tip for the highest accuracy.
364R TORX ® driver with T-handle.
With MagicSpring ® .
Blade: Chrome-vanadium steel, through hardened, chrome-plated.
Handle: Wiha Classic T-handle.
Application: For high torque transfer with minimal effort.
Extra: MagicSpring ® made of stainless steel holds TORX ® screws
tight at various angles.
ChromTop
® blade tip for the highest accuracy
Blade made of hexagonal material is particularly capable
of withstanding stress.
364IP TORX PLUS ® driver with T-handle.
Blade: Chrome-vanadium steel, through hardened, chrome-plated.
Handle: Wiha Classic T-handle.
Application: For high torque transfer with minimal effort.
Extra: The stronger profile of the TORX PLUS ® tip
allows up to 25% extra torque than the TORX ® profile.
ChromTop ® blade tip for the highest accuracy.
Attention: TORX PLUS ® keys cannot be used with TORX ® screws.
Wiha flag and key handle.
• Large support areas for thumb
and index finger on the
ergonomically shaped handles.
The transmission of high
torques is thus quite simple
• Cylindrical handle shaft for
quick turning of screws
• Innovative torsion blade
for T5 to T10 greatly reduces
the risk of breakage. Thus,
broken profiles in the screw
head are largely avoided.
If more torque than required is
applied, the blade responds
elastically (cf. picture)
• Thanks to thin blades,
even covered screws in the
screw axis can be turned
For TORX ® screws.
Order-No.
01328 T9
100 4.0 126 80 26 10
01329 T10 100 4.0 126 80 26 10
01330 T15 100 4.0 126 80 26 10
01331 T15 200 5.5 226 80 26 10
01332 T20 100 4.0 132 100 32 10
01333 T20 200 5.5 232 100 32 10
01334 T25 100 4.5 132 100 32 10
01335 T25 200 5.5 232 100 32 10
01336 T27 100 5.5 132 100 32 10
01337 T27 200 5.5 232 100 32 10
01338 T30 100 6.0 132 100 32 10
01339 T30 200 6.0 232 100 32 10
01340 T40 100 7.0 132 100 32 10
01341 T40 200 7.0 232 100 32 10
01343 T45 250 8.0 288 120 38 10
01345 T50 250 9.0 288 120 38 10
364 VB TORX ® driver set with T-handle.
In bench stand, 7 pcs.
Blade: Chrome-vanadium steel, through hardened, chrome-plated.
Handle: Wiha Classic T-handle.
Application: For high torque transfer with minimal effort.
Extra: ChromTop ® blade tip for the highest accuracy.
Robust metal workbench holder to place on workbench or wall-mount.
Tip diagrams printed to scale.
Order-No. Series
01348 364 VB 1
364 T10x100 T15x100 T20x100 T25x100
T30x100 T40x200 T50x250
For TORX ® and TORX PLUS ® screws.
Order-No.
27964 T9
100 4.0 126 80 26 10
27965 T10 100 4.0 126 80 26 10
27966 T15 100 4.0 126 80 26 10
27967 T20 100 4.0 132 100 32 10
27968 T25 100 5.0 132 100 32 10
27969 T27 100 6.0 132 100 32 10
27970 T30 100 6.0 132 100 32 10
27971 T40 100 8.0 132 100 32 10
Order-No.
26953 9IP
100 4.0 126 80 26 10
26954 10IP 100 4.0 126 80 26 10
26955 15IP 100 4.0 126 80 26 10
26956 20IP 100 4.0 132 100 32 10
26957 25IP 150 4.5 182 100 32 10
26958 27IP 150 5.5 182 100 32 10
26959 30IP 150 6.0 182 100 32 10
26960 40IP 150 7.0 182 100 32 10
Wiha Classic T-handle.
The classic for high torques.