Wiha Tools Product Catalogue 2012-2014 - Manual (Page 69)

Wiha Info
137
www.wiha.com
366BE TORX ® ball end L-key, long.
Blade: Chrome-vanadium steel, through hardened, manganese-phosphated.
Application: For all hard-to-reach TORX ® screws.
Extra: The TORX ® ball end enables fastening and unfastening at an angle of up
to 25°.
With elongated TORX
® profile behind ball end.
Wiha ErgoStar
The right idea:
a flowing movement means all L-keys
are ready for removal.
136
With elongated TORX ® profile behind ball
end.
Tight spaces that only allow
fastening and unfastening in at
an angle: In these "problem zones"
for TORX
® screws, Wiha TORX ® ball
end tools are in demand.
The advantages for the user are
obvious: With the improved
geometry of the ball end, TORX
®
screws can now be screwed in
and out even at angles up to 25°.
As a result, maximum torques are
no longer a problem even in
difficult installation positions. We-
aring of the tool and screw head is
noticeably reduced.
And Wiha is also pursuing a diffe-
rent path in production. Thanks to
an innovative manufacturing pro-
cess, cold forming, the TORX
® ball
end gains a great deal of strength.
So that these advantages benefit a
broad range of applications, the
Wiha TORX ® ball end.
Simpler, more powerful, safer.
Plenty of room to manoeuvre: The ball
end enables access to the TORX
® screw
at an angle of up to 25°.
Wiha TORX ® ball end is integrated
in several types of tools and is
available in proven Wiha quality:
• as an L-key in sizes T9 to T40, se-
parately or as a set with a holder
• as a bit with the lengths 50, 70
and 90 mm
• as a screwdriver with the ergono-
mic SoftFinish ® handle, through-
hardened, brushed
chrome-plated blade and preci-
sion-fitting ChromTop
® blade tip
Thanks to their ruggedness, flexibi-
lity and diversity, Wiha TORX
® ball
end tools are indispensable for any
user who has to depend on a long
tool life under difficult working con-
ditions.
Wiha TORX ® ball end.
• With optimised TORX ® ball end
geometry
• Increased strength thanks to
the special cold forming on a
system developed by Wiha
especially for this purpose
• Enables fastening and
unfastening at angles of 25°
• Simple insertion of the tool/bit
and fastening/unfastening,
especially in hard-to-reach
locations
• Broad product range:
As an L-key, as a bit and as
a SoftFinish
® screwdriver
For TORX ® screws.
Order-No.
32386 T9
111 21 7/64 10
32387 T10 121 23 1/8 10
32388 T15 136 27 9/64 10
32389 T20 148 29 5/32 10
32390 T25 163 33 3/16 10
32391 T27 176 36 7/32 10
32392 T30 191 38 1/4 10
32393 T40 210 43 5/16 10
33749 T45 232 50 3/8 10
33750 T50 232 50 3/8 10
For TORX ® screws.
366BE HZ13 TORX ® ball end L-key set in ErgoStar holder.
Manganese-phosphated, 13 pcs.
Blade: Chrome-vanadium steel, through hardened, manganese-phosphated.
Application: For all hard-to-reach TORX ® screws.
Extra: Mechanical operation of the space-saving ErgoStar holder makes simplest
removal of each individual L-key possible without movement of the others.
TORX
® ball end (from T9 size) enables fastening at an angle of up to 25°.
With elongated TORX ® profile behind ball end.
Order-No.
36487
366BE HZ13 5
366 T5 T6 T7 T8
366BE T9 T10 T15 T20
T25 T27 T30 T40
T45
SB 366BE HZ13 TORX ® ball end L-key set in ErgoStar holder.
Manganese-phosphated, 13 pcs.
In blister pack.
Order-No.
36486
SB 366BE HZ13 5
N E W
N E W