Vutec ELEGANTE MOTORIZED - Installation Instructions - Manual (Page 2)

2
Elegante-Rev H 08/30/2010
General Installation Notes
The Elegante screen can be mounted on a wall, ceiling or suspended from ceiling. The Elegante Projection Screen meets
requirement for fire-resistant and low smoke-producing characteristics.
The screen surface is centered in the housing
The brackets should be mounted into studs or blocking in the wall/ceiling or in drywall (minimum thickness [1/2”] with specified
anchors (not supplied). For any other type of installation and other types on non-wood frame construction, the selection of
appropriate mounting hardware should be made by a qualified installer and it should follow all local building and safety codes
Determine bracket location per instructions in Figure 1a. And configure mounting kit according to mounting preferences show in
“Figure 1c” for Wall mount, “Figure 1d” for ceiling mount or “Figure 1e” for ceiling suspended mount.
The mounting structures and fasteners must be of adequate strength to support the screen even abusive pulling on the screen surface
will not cause the housing to work loose or fall. Housing must be mounted level
Figure 1a
Figure 1b
Wall Installation
Figure 1c
Ceiling Installation
Figure 1d
Suspended Installation
Figure 1e