beautypg.com

Appendix, Troubleshooting – VTech FS6224_-2-21-3 Manual User Manual

Page 57

background image

53

Appendix

Appendix

Troubleshooting

and New voicemail show on the handset display and I don’t know why.

Your telephone has voicemail indication that is separate from the built-in answering system.

If and

New voicemail appear on the handset, your telephone has received a signal from

your telephone service provider that you have a voicemail message waiting for you to retrieve

from them. Contact your telephone service provider for more information on how to access

your voicemail.

I cannot retrieve voicemail messages.

Your telephone has both a built-in answering system and voicemail indication. They are

independent features and each alerts you to new messages differently (page 37). If you

subscribe to voicemail service from your telephone service provider (charges may apply),

contact your telephone service provider for more information on how to access

your voicemail.

The answering system does not answer after the correct number of rings.

Make sure the answering system is on. When the answering system is on, the

/ANS ON/OFF light on the telephone base should be lit and ANS ON should show

on the handsets.
If toll saver is selected, the number of rings changes to two when there are new messages

waiting (page 35).
If the memory is full or if the answering system is off, the answering system answers after

10 rings.
In some cases, the answering system is affected by the ringing system used by your

telephone service provider.
If you subscribe to voicemail service, change the number of rings so that your answering

system answers before your voicemail answers (page 35). To determine how many rings

activate your voicemail, contact your telephone service provider.
If there is a fax machine connected to the same telephone line, try disconnecting the fax

machine. If that solves the problem, consult your fax machine documentation for information

on compatibility with answering systems.

The outgoing announcement is not clear.

When recording the announcement, make sure you speak in a normal tone of voice towards

the microphone of the handset.
Make sure there is no background noise when recording.