VTech FS6224_-2-21-3 Manual - Manual (Page 13)

9
Using the menu
You can use a cordless handset to change the telephone settings.
In the ringers menu, you can select the ringer tones and adjust the ringer volume for
incoming calls.
In the settings menu, you can change the settings for LCD language, voicemail
indicators, key tone, home area code and dial mode.
Go to
Answering system settings (from page 32 to page 36) for instructions to
change the answering system settings.
To enter the handset menu:
Press MENU when the phone is not in use.
Press or until the handset displays the desired
feature menu.
Press
SELECT to enter that menu.
To return to the previous menu, press CANCEL.
To return to idle mode, press and hold CANCEL.
Handset ringer volume
You can adjust the ringer volume or turn the ringer off on each
handset. When the ringer is turned off, the handset displays
Ringer off.
Press MENU when the handset is not in use.
Press or until the handset displays Ringers,
then press ress SELECT.
The handset displays Ringer volume, then press SELECT.
The handset displays Volume: with the current setting flashing.
Press or to sample each ringer volume level.
Press
SELECT to save your selection. You hear a
confirmation tone.
If the ringer volume is set to off, that handset is silenced for all incoming calls except
paging tone.
1.
2.
3.
•
•
1.
2.
3.
4.
5.
Ringers
Volume:High
Ringer volume
Press to
scroll down
Press to
scroll up
Telephone settings