VTech FS6224_-2-21-3 Manual - Manual (Page 36)

Answering system
Use the answering system menu of a cordless handset to turn on or off the answering
system, message alert tone or call screening, set up the announcement message, or
change the number of rings, remote access code or message recording time.
You may also turn on or off the answering system at the telephone base.
Announcement
The telephone is preset with a greeting that answers calls with “Hello, please leave
a message after the tone.” You can use this preset announcement, or replace it with
your own.
Record your own announcement
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, then press SELECT.
Press SELECT to choose Announcement. The handset
displays Play [2] Del [3] Rec [7] and the handset announces,
“To play, press 2. To record, press 7.”
Press 7. The handset displays Record in 5 sec (countdown)
and the handset announces, “Record after the tone. Press 5
when you are done.”
After the tone, speak towards the handset microphone to record
your own announcement. The handset displays Recording...
Stop [5].
Press
5 when done. The handset displays Play [2] Del [3] Rec [7].
Press 2 to play the recorded announcement; or 7 to record again
if desired. Press 5 or OFF to stop the playback at any time.
Your announcement can be up to 90 seconds in length.
Announcements shorter than two seconds will not be recorded.
1.
2.
3.
4.
5.
6.
•
•
Play Del Rec
[2] [3] [7]
Record in 5 sec
Recording
...
Stop
[5]
Announcement
Play Del Rec
[2] [3] [7]
Answering system settings
32