Set date and time, Telephone settings – VTech FS6224_-2-21-3 Manual User Manual
Page 15

11
Telephone settings
Set date and time
The answering system announces the date and time of each message prior to
playing it. Before using the answering system, set the date and time as follows. If you
subscribe to caller ID service, the day, month and time are set automatically with each
incoming call. However, the year must be correct so that the day of the week can be
calculated from the caller ID information.
Press
MENU when the handset is not in use.
Press or
until the handset displays Set date/time,
then press
SELECT.
Press or to select the month then press
SELECT,
or use the dialing keys to enter a two-digit number (
01-12).
Press or to select the date then press
SELECT,
or use the dialing keys to enter a two-digit number (
01-31).
Press or to select the year then press
SELECT,
or use the dialing keys to enter a two-digit number (
00-99)
then press
SELECT.
Press or to select the hour then press
SELECT,
or use the dialing keys to enter a two-digit number (
01-12).
Press or to select the minute then press
SELECT,
or use the dialing keys to enter a two-digit number (
00-59).
Press or to select
AM or PM.
Press
SELECT to save the settings. You hear a confirmation tone.
If the date and time are not set when a message is recorded, the system announces,
“Time and date not set,” before each message plays.
When there is a power failure, the date and time need to be reset.
The phone plays two beeps if you enter an invalid number.
1.
2.
3.
4.
5.
6.
7.
8.
9.
•
•
•
Set
date/time
Date: MM/DD/YY
Time:
HH:MM
- -