VTech FS6224_-2-21-3 Manual - Manual (Page 40)

36
Answering system settings
Message alert tone
When the message alert tone is set to on, and there is at least one
new message, the telephone base beeps every 10 seconds.
To turn this feature on or off:
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, then press SELECT.
Press or to scroll to Ans sys setup, then press SELECT.
Press or to scroll to Msg alert tone, then press SELECT.
Press or to choose On or Off, then press SELECT to
confirm your selection. You hear a confirmation tone.
The answering system must be turned on for the message alert tone to be functional.
Press any key on the telephone base (except
/FIND HANDSET) to temporarily silence
the message alert tone.
1.
2.
3.
4.
5.
•
•
Recording time
You can set the recording time limit for each incoming message.
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, then press SELECT
.
Press or to scroll to Ans sys setup, then press SELECT
.
Press or to scroll to Recording time, then press SELECT .
Press or to choose 3 minutes, 2 minutes or 1 minute,
then press SELECT to confirm your selection. You hear a
confirmation tone.
1.
2.
3.
4.
5.
Ans sys setup
Msg alert tone
Off
Ans sys setup
Recording time
3 minutes