TROY Group Hewlett-Packard LaserJet 9000 Font DIMM Kit Quick-Start Guide - Manual

Font DIMM Printer / Font DIMM Kit
Quick-Start Guide
Document #50-70381-001 Rev. I
Page 1 of 9
READ ME FIRST
Installation Instructions for
TROY Font DIMM Printer and Font DIMM Kit
(For use with Hewlett-Packard LaserJet 1300, 1320, 2300, 4100, 4200, 4300, 8100, 8150, and 9000 Printers)
Introduction
Use the TROY Font DIMM Printer and Font DIMM Kit CD to install the required Hewlett-Packard LaserJet
printer drivers and TROY support files. To ensure successful installation of your TROY Font DIMM product,
perform the following steps in sequential order. The documentation and installation files contained on the
TROY Font DIMM Printer and Font DIMM Kit CD will be needed in the event that your printer is reinstalled
in a new location or after service has been performed.
Package Contents
• TROY Font DIMM
• TROY Font DIMM Printer and Font DIMM Kit CD
• TROY Security Printing Solutions Information Sheet
• TROY Software License Agreement
• TROY MICR Document Template
• TROY Font DIMM Kit User’s Guide (provided in PDF format on the CD)
• TROY Font DIMM Kit Installation Guide (provided in PDF format on the CD)
• TROY MICR Basics Handbook (provided in PDF format on the CD)
•
TROY Font DIMM Printer and Font DIMM Kit Quick-Start Guide (this document)
STEP 1:
Install the TROY MICR Toner Cartridge and TROY Font DIMM
1. Be sure to install a TROY MICR toner cartridge (purchased separately from TROY) in the same manner
as described for the standard Hewlett-Packard toner cartridge (refer to your Hewlett-Packard Getting
Started Guide for details). A MICR toner cartridge must be installed in your printer in order to print
MICR documents. For best results, TROY MICR toner cartridges are recommended. TROY’s high-
quality MICR toner is specifically designed for the MICR fonts contained on your TROY Font DIMM.
NOTE: If you purchased a TROY Font DIMM printer, skip the following step.
The Font DIMM is already installed in the printer.
2. Install the TROY Font DIMM (supplied with your
TROY Font DIMM Solution) by using the TROY Font
DIMM Installation Guide provided in PDF format on
the TROY Font DIMM Printer and Font DIMM Kit
CD. The TROY Font DIMM must be installed before
proceeding to Step #2 on the next page.