MSD 8092 Honda_Acura Rotor for 82921, 82922, 8296 Cap Installation - Manual

M S D
• W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 5 - 7 1 2 3 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
ONLINE PRODUCT REGISTRATION: Register your MSD product online. Registering your product
will help if there is ever a warranty issue with your product and helps the MSD R&D team create
new products that you ask for! Go to www.msdperformance.com/registration.
YEAR MODEL ENGINE NOTES CAP/ROTOR RED POWER EXTREME OE EXTREME
KIT CAP EXTREME ROTORS
ACURA
’88-’91 Integra 1.6L/1.8L w/Tec Dist. PN 82903 PN 8092
’92-’93 Integra (All) 1.7L/1.8L w/Tec Dist. PN 82923 PN 82921 PN 82922 PN 8296 PN 8092
’94-’01 Integra GS, LS, RS 1.8L w/Tec Dist. PN 82923 PN 82921 PN 82922 PN 8296 PN 8092
’94-’01 Integra GS-R/Type-R 1.8L w/Tec Dist. PN 82933 PN 8092
HONDA
’90-’91 Accord 2.2L w/Tec Dist. PN 82923 PN 82921 PN 82922 PN 8296 PN 8092
’98-’02 Accord DX (Only) 2.3L w/Tec Dist. PN 82923 PN 82921 PN 82922 PN 8296 PN 8092
’88-’91 Civic/CRX 1.5L/1.6L w/Tec Dist. PN 82903
’93-’97 Civic Del Sol 1.5L/1.6L w/Tec Dist. PN 82923 PN 82921 PN 82922 PN 8296 PN 8092
’92-’00 Civic/Si (Exc. ’96-’00 HX) 1.5L/1.6L w/Tec Dist. PN 82923 PN 82921 PN 82922 PN 8296 PN 8092
’97-’01 CRV 2.0L w/Tec Dist. PN 82923 PN 82921 PN 82922 PN 8296 PN 8092
’92-’01 Prelude 2.2L/2.3L w/Tec Dist. PN 82923 PN 82921 PN 82922 PN 8296 PN 8092
The MSD Rotor will install to stock Honda/Acura distributors with a factory style cap or with MSD’s
line of Extreme Power Caps. Consult the chart below to confirm that you have the correct rotor for
your application. It is recommended to install a new distributor cap with the rotor. MSD's caps are
listed in the chart in Figure 1.
Parts Included:
1 - Rotor
1 - Screw and Lock Washer
MSD Rotor for Honda/Acura Engines
PN 8092
Figure 1 Rotor Application Chart.
1. Remove the distributor cap. If you choose to
remove the spark plug wires, be sure to mark
their location on the cap.
2. For the PN 8092 Rotor you may need to rotate
the engine to access the rotor retaining screw.
Once the screw is accessible, remove it and
pull the rotor off (Figure 2).
3. Install the MSD Rotor and the retaining screw
with washer. Install the distributor cap.
Figure 2 Replacing the Rotor.
RETAINING SCREW