High Lifter Lift Kit for Yamaha Rhino 450_660 (2004 to mid-2006) - Manual (Page 6)

Rear of ATV
6) Once you have completed grinding portions of the shock mount reinstall the shock, attaching only the
bottom portion.
7) Replace the stock bolt with the 12 x 70 button head bolt and 12mm lock nut. Make sure that the head
of the bolt is closest to the CV axle bar.
8) You will need to grind down a small portion of the bolt and shock for clearance.
9) Next, attach the top of the shock to the ATV using brackets provided in the kit.
10) Place the large spacer between the shock mount tabs. On the outside of the shock mount attach the
rear lift brackets. Loosely secure the spacer and rear lift brackets with the 12 x 80 hex bolt and 12mm
lock nut.