Assembly instructions, 5" trp stem casters with bumpers, Polyurethane stem casters with bumpers – Focus Foodservice Shelving Solid STAINLESS STEEL - Assembly Instructions User Manual
Page 2: Polyurethane threaded casters with bumpers, 18" chromate side handle, 24" chromate side handle
Call Customer Service at 1.800.968.3918 | Fax 1.800.968.4129
www.focusfoodservice.com
FOODSERVICE, LLC
ASSEMBLY INSTRUCTIONS
Model# FTPRCST5
5" TRP Stem Casters with Bumpers
Model# FSCAST5 5"
Polyurethane Stem Casters with Bumpers
Model# FTCAST5 5"
Polyurethane Threaded Casters with Bumpers
Step 1
Slide a plastic bumper up the bottom of post about 4˝ - 6˝, smooth side facing up.
Step 2
For stem - Install caster by inserting it into the hole in the bottom of the post.
For screw-in - Remove leveling assembly by turning it counter-clockwise.
Install caster by screwing it into the hole at the bottom of the post.
Step 3
Slide the plastic bumper down to the bottom of the post.
Step 4
Repeat these steps to install the remaining 3 casters.
Step 5
Then assemble shelving unit.
Note:
The casters can be locked in place by turning the steel lock mechanism
counter clockwise on the side of two of the casters.
Weight capacity - Stem - 300 lbs. per caster
Screw-In - 200 lbs. per caster
5" Industrial Stem
Casters with Bumpers
5" Industrial
Screw-In Casters
with Bumpers
Model# FXHAND18C
18" Chromate Side Handle
Model# FXHAND24C
24" Chromate Side Handle
Helpful Hint:
When placing the plastic tapered sleeves onto the posts, slide the plastic
tapered sleeves up or down on the post until you feel it “snap” into the lines or grooves of the post.
It is normal to have a slight gap in-between the two pieces of the plastic tapered sleeves when it is
placed on the post.
Installing the Side Handle
Install handle on the two posts that are 18˝ apart and choose the desired height for the side
handle (Note: Handles can be adjusted every 1˝). Snap 2 plastic tapered sleeves into place
on each post at the desired height. With the wider portions of the round collars facing the
bottom of the unit, slide the side handle down from the top of the posts onto the plastic
tapered sleeves. (Note: Make sure to leave enough room to install shelf above handle. )
rev. 0612