Focus Foodservice HDS-PluS HigH DenSity Storage SyStem - Specification Sheets - Manual

Item #
Job
FOCUS HDS-Pl
US
™
H
Ig
H
Den
SI
ty S
tO
ra
ge S
y
S
tem
Focus Foodservice, LLC • 300 Knightsbridge Parkway, Suite 500 • Lincolnshire, IL 60069 • www.focusfoodservice.com
Features
• Design: Maximize usable
storage space. Over 35%
increased storage capacity in
same amount of space
as stationary units. Eliminates
excess traffic aisles. The
open wire design of these
heavy gauge chromate or
green epoxy coated shelves
minimizes dust accumulation
and allow free circulation
of air, greater visibility of
stored items and greater
light penetration.
HDS-PluS ™ HigH DenSity Storage SyStem
• Versatile: Choose a track length to fit your space. Choose from three widths of shelves (18", 21", or 24") to
meet your requirements. Can be constructed to fit almost any area in almost any configuration. The overhead
track system guides the mobile units and opens an easy access, clutter-free aisle between any two (or more) units,
promoting cleanliness, accessibility and improved organization of stored goods.
• Fast and Secure assembly: Entire system assembles in minutes using only an Allen wrench. Our High Density
Storage System features 5 easy-to-assemble components: Shelving, Posts, Stationary Unit Kits, Mobile Unit Kits and Track Sets.
• Shelving: Pick your finish (Chromate or Green Epoxy) and your size (18", 21" or 24" widths). Tapered
openings in the shelf corners slide over the tapered split sleeves to lock on the shelf. On stationar y shelving
units, each shelf up to 48" in length is rated to support up to 800 lbs. of uniformly distributed weight. Shelves
longer than 48" support 600 lbs.
• Posts: Pick your finish (Chromate or Green Epoxy). 80" Post lengths are specifically designed for use in our
High Density Storage System. Posts have circular grooves at 1" (25mm) intervals and are numbered at 2" (50mm)
intervals. Tapered plastic split sleeves snap together around each post.
• Stationary Unit Kits: Use on both ends of the storage system or as a middle unit (for lengths 20’ and over).
Must have a minimum of 2 stationary units per system. Assembles quickly and easily to shelving posts; enhances
stability and security of the system. Includes 4 triangular security feet, 4 self-leveling track guide blocks, and
4 locking track collars.
• mobile Unit Kits: One set is needed for each mobile shelving unit. Assembles quickly and easily to shelving
post. Self adjusting guide blocks accommodates uneven surfaces. Each kit includes 4 each 6" Polyurethane Casters,
2 Stainless Steel Caster Channels (pick your width: 18", 21" or 24") and 4 self-leveling track guide blocks.
• track Sets: Available in lengths of 6 ft to 21 ft.**. Sections are connected together with easy-to-use track
joiners allowing a large range of length combinations.
• easy to Order: Simple order process. All necessary parts are packaged into easy-to-order, ready-to-skip kits.
Shelves and shelving posts sold separately.
** NOTE: Track Sets 20’ and over require an additional Stationary Unit Kit, shelves and shelving posts in the center of the track. For track sections
over 21’, call for quotation.