EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 63)

3.2. Supported Configurations
3.2.1. General Information on Supported
Configurations
Overview on Supported Configuration Types
An XT2+ server, equipped with V3X or COHX boards, supports the following
configurations types:
• standard SD/HD configurations
• SLSM SD/HD configurations
• 3D/1080p configurations
• SLSM 3D/1080p configurations
Note
The feature
Mix on one channel
1
is available on all SD/HD configurations with
V3X boards.
Number of Record and Play Channels
The number of record and play channels for a given configuration is defined in the
Channels tab, in the Base settings. See section "Base Settings" on page 91.
The number of play and record channels available may differ depending on the
configurations running on the XT2+ server:
• Mutlicam LSM mode, when the EVS server is controlled by the Remote Panel
• Spotbox mode, when the EVS server is controlled by industry-standard protocols
such as Sony BVW75, VDCP, Odetics, DD35, EVS’ AVSP, IPDP, EditRec or LinX
API.
1
Feature that allows using the secondary link of the codec module of a player channel on the V3X board (J3) as
the preview channel to provide the PGM/PRV mode with a single codec module.
CONFIGURATION MANUAL XT2+ Server 11.02
3. Multicam Configuration 55