EVS IPDirector Version 6.2 - June 2013 RECORDER PANEL User Manual - Manual (Page 19)

• A recorder channel physically connected to a router OUT port has been assigned to
the Recorder Panel.
How to Assign a Router IN Port to a Recorder Channel
To assign an IN port of a video router to a recorder channel from the RecorderPanel or to
change the assignment, proceed as follows:
1. Click the Change Recorder Input button next to the Recorder Channel field.
The Assign Recorder Source window opens:
It shows the name of the router IN port already associated to the recorder channel.
2. Click the arrow next to the Router IN Port field.
The list of all the router IN ports is displayed:
3. Select an IN port.
The Router IN Port field is highlighted to warn the users that the selection has
changed but has not been saved:
4. Click TAKE to send a command to the router service to link the router OUT port
connected to the recorder channel with the selected router IN port.
The name of the IN port is displayed next to the recorder channel name.
IPDirector - Version 6.00 - User Manual - Recorder Panel
3. Managing Channels 11