EVS IPDirector Version 6.2 - June 2013 RECORDER PANEL User Manual - Manual (Page 13)

Operation
User
Interface
Button
Keyboard
Shortcut
Description
Start
Record
+
Starts the recording from a recorder
channel of an EVS video server.
It can only be used in IPDP Spotbox
mode. See section "Recorder Panel Use
Depending on EVS Video Server Mode"
on page 7.
When the server is recording, the button
turns to and is not available.
Stop
Record
+
Stops the recording from a recorder
channel of an EVS video server.
It can only be used in IPDP Spotbox
mode. See section "Recorder Panel Use
Depending on EVS Video Server Mode"
on page 7.
2.3. Clip Creation Pane
2.3.1. Clip Creation Buttons and Shortcuts
The following table gives the meaning of each clip creation operation. A button and/or a
keyboard shortcut can be used to perform each action.
Operation
User Interface
Button
Description
Mark IN Sets an IN point at the timecode shown in the
Current Timecode field.
Mark
OUT Sets an OUT point at the timecode shown in the
Current Timecode field.
Clear IN Clears the IN point which has just been set and not
yet saved.
Clear
OUT Clears the OUT point which has just been set and
not yet saved.
Save Clip Saves the new clip after having marked an IN point
and an OUT point.
Depending on the settings, the Save Clip window
will open or not.
2.3.2. Time Information Fields
The following time information is displayed as follows for the clip being created.
IPDirector - Version 6.00 - User Manual - Recorder Panel
2. User Interface 5