EVS IPDirector Version 6.0 - November 2012 Part 7 User's Manual - Manual (Page 43)

The Element to Move is Cued
The channel assignment is not modified when the cued element is moved. Therefore, the
channel order is affected. Cued elements always remain cued.
The Element is Moved from below the Cued
Elements
The channel assignment is modified below the removed element and resorted according
to the ABCD sequence.
When the element is moved and inserted above or between the cued elements, its
channel remains the same. When it is moved and inserted below the cued elements, its
assigned channel is modified according to the ABCD sequence.
5.5.3. Impact on the Channel Association with Recue
Mode ON
To know how the system will behave after move operations with the RECUE mode
enabled, consider that it first performs a remove operation and then an insert operation.
5.6. Channel Sort and Reset
5.6.1. Introduction
The Channel Sort feature is used to reassign the channel letters (ABCD) to the elements
in the playlist. The order may have changed by inserting, removing or moving elements in
the list.
The Reset operation recues all elements and takes the playlist back to the initial state.
IPDirector - Version 6.00 - User Manual - AB Roll Playlist
5. Playlist Editing 35