EVS LSM Connect - Manual (Page 17)

2.5. Copying and Moving Clips
Introduction
This section explains how to copy or move one or more clips from one position to another
one, located on the same EVS server or to a distant EVS server.
You need to perform copy and move actions in Grid view, not in List view. To copy and
move clips, you will use commands available in the CAB, the blue Contextual Action bar
located at the top of the screen:
Tip
Clips can only be pasted on empty positions. Do not select a position that is not
empty for pasting selected clips.
Selecting Clips
This is the initial step before you can apply a command to one or several clips
To select one clip, playlist or playlist elements, simply tap once on the requested item.
Double tap or tap and hold will not allow other types of selection.
To select several items, first tap the multi-selection icon , then select the requested
items.
When the multiselection mode is active, you can select several clips on different banks,
pages of the same EVS server or even on different EVS servers.
How to Copy or Move Clips
1. After selecting the requested clips in a Clip Grid view, do one of the following actions:
◦ To move clips, tap Cut in the CAB.
◦ To copy clips, tap the Copy icon.
2. If you want to copy or move the clips to a distant EVS server, do the following.
Otherwise, go to step 3:
a. Tap the Network icon .
b. Select the requested server.
c. Tap OK.
USER MANUAL LSM Connect 1.3
2. Clip Management 11