EVS LSM Connect - Manual (Page 16)

Actions on Clips
The table below describes briefly the available commands for clips. Some of the actions
are explained in details in a separate topic:
Action button Description
Allows you to cut selected clips, send them to the clipboard, and then
move them to a new selected position using a paste action.
See section "Copying and Moving Clips" on page 11
Allows you to copy selected clips, send them to the clipboard, and
then copy them to a new selected position using a paste action.
See section "Copying and Moving Clips" on page 11.
Allows you to delete selected clips.
Allows you to set selected clips as 'to be archived'.
Clips set as to be archived but not archived yet have a blue folder
displayed in the grid view.
When the clips are archived, they have a white folder displayed in the
grid view.
Allows you to push selected clips to the location defined in the Push
settings in the Multicam Configuration module.
In Copy and Move actions, when you select the requested position for copy or move, the
following paste options can be available in the CAB, depending on the type of selection
(single ou multiselection):
Action button Description
When you have selected a single clip, you can copy it to
the selected new position using the Paste icon in the
CAB.
When you have selected several clips, you can copy
them to the selected new position using Paste Same
Position icon in the CAB.
In this case, the clips are pasted one after the other from
the selected position, taking into account the initial
CAM name.
When you have selected several clips, you can copy
them to the selected new position using Paste
Contiguous icon in the CAB.
In this case, the clips are pasted one after the other from
the selected position, disregarding the initial CAM
name.
10 2. Clip Management
EVS Broadcast Equipment S.A. 1.3.A July 2013