AASTRA 7434ip User Guide EN - Manual (Page 10)

6/1553-DBC 434 01 Uen D 2012-02-22 10
A ASTRA 7434 IP D ESCRIPTION
Table 1 Phone Connections
Type of
Connection Description
Power inlet
The phone is powered by an external AC/DC
adapter (see details below) or, alternatively, over a
Power over Ethernet (PoE) switch.
• If you use the external power adapter, connect
one end of the adapter to the phone connection
marked
, and the other end to a power
outlet.
• If you use the PoE connection, you only have to
connect the phone to the LAN.
LAN inlet
Connect one end of the Ethernet cable to the phone
connection marked Net, and the other end to a LAN
connection.
The phone conforms to the 802.1x standard for LAN
authentication.
If the phone is equipped with a gigabit Ethernet unit
(DBY 412 02) and connected to a 1 gigabit LAN, it
can be powered by a power adapter, or by a power
ethernet switch.
PC inlet
Connect one end of the PC cable to the connection
marked , and the other cable end to a RJ45
connection on your PC.
When the phone is starting up (booting), a
connected PC will lose network connection for a few
seconds.
Headset connector
You can connect a headset to the connection
marked . It is also possible to use a wireless
headset. In case of using a wireless headset,
connect the headset radio base to the
connector.