AASTRA 600c_d for OpenCom 1000 User Guide EN - Manual (Page 78)

72
Devices menu
Details... Shows call number and name.
Delete The entry will be deleted.
Delete all The list will be deleted after a confirmation prompt.
"Call diversion" menu
You can divert calls intended for you to a different internal or external call number. With external call
numbers you must always key in the code for seizing an external line first.
Calls can be diverted immediately, after a delay (if the call was not answered on your handset) or if
the terminal is busy. Call diversions can also be activated for internal, external or all (internal and
external) calls. You can set up several types of call diversion (immediate, with a delay or if busy)
simultaneously. For example you can program an immediate call diversion for external calls to one
number and a call diversion after a delay for internal calls to another number. If several types of call
diversion are activated simultaneously, immediate call diversions always take priority.
If OpenVoice 500, the integrated Voice Mail System for the OpenCom 1000 communication system is
installed, you can also forward calls to your voice box’s call number.
If call diversion is activated, the
symbol is shown on the first line of the display in idle mode.
Divert phone: All calls to your phone’s call numbers are diverted, i.e. all the call keys
(INTERNAL/EXTERNAL keys). If some of these call keys are stored as MULTIPLE keys on other devices,
the call diversion automatically applies to these keys too. Calls to MULTIPLE keys or direct call keys
on your own phone are not diverted.
Divert key: In this instance the selected call key is diverted.
Divert hunt grp.: The diversion types immediate and busy can be set up for a user group. The phone
which is activating the call diversion must be a subscriber in the user group to be diverted.
Divert phone
Immediately Calls are diverted immediately.
After time Calls are diverted after a certain period of time.
Busy
Calls are diverted when your phone is busy.
On / Off Select whether you want to switch the call diversion function on or off.
Dest.: Enter the destination call number (for external call numbers,
add the code for assigning an external line).
Int. & ext. calls
Specify which type of calls are to be diverted: internal
and external calls, external calls, or internal calls.