Setting up an enquiry connection from lists, Handing a call over to an internal subscriber – AASTRA 600c_d for OpenCom 1000 User Guide EN User Manual
Page 57
51
Briefly press the❯❯❯ menu.
Use the navigation keys to select the Select line menu entry and the call key for the
waiting subscriber.
. . . or
Press the Brok. or R softkey.
c
You are through once again to the waiting subscriber.
Setting up an enquiry connection from lists
c
You are making a call.
To activate an enquiry call:
Press the R key. Your first connection is put on hold.
Please note: Once you have pressed the R key, you only have a limited amount of time
available to make your menu selection.
Briefly press the❯❯❯ menu.
Use the navigation keys to select a list
•
Central directory
•
Personal directory
•
Redial list
•
Caller list
You can also access the system phone book using the navigation key
.
You can also access the private phone book using the navigation key
.
Note
After selecting an entry in the system phone book dial it by pressing the Ok softkey.
After selecting an entry in the other lists (by pressing the softkey
once or several
times) dial the entry by pressing the softkey
.
Handing a call over to an internal subscriber
You want to hand an internal or external call over to the internal subscriber and have selected an
enquiry connection to do so (see page 49).
The subscriber called through the enquiry call answers the phone:
c
Announce that you are about to hand over a call.
Press the end key (red)
Telephoning