AASTRA 7446ip (5446ip) for MX-ONE User Guide EN - Manual (Page 78)

6/1553-DBC 446 01 Uen E8 2010-07-08 78
S ETTINGS
signal you choose will be used with different ring cadences for each call
type. You can also distinguish between callers by giving each phone
number its own ring signal.
15.2.2.1 Setting the Ring Character
Ring tones are generated by a tone ringer in the phone loudspeaker.
To change the ring tone, do the following:
1. From the My Settings page, select Ring Signals.
2. Select Ring tone. The current setting is displayed.
3. Tap Select to change the current settings.
4. Enter a number between 0 and 9 in the desired ring tone field.
Select a field by tapping it, or by pressing up or down on the navi-
gation key. You can choose between the following formats:
• Set new ring tones for incoming and outgoing calls and call-
back calls
• Set incoming external call signal
• Set incoming internal call signal
• Set Call Back ring signal
5. Tap Save to confirm the change and return to the previous page.
15.2.3 Time and Date
The time and date are updated automatically through the exchange, but
you can adjust the format in which the time and date are displayed.
15.2.3.1 Changing the Time Format
To change the time format, do the following:
1. From the My Settings page, select Time & Date.
2. Select Time Format.
3. Select a time format. Available options are the 24 hour and 12
hour formats.
4. Tap Select to confirm the setting and return to the previous page.