AASTRA DT4x3 for BusinessPhone User Guide EN - Manual (Page 66)

AMT/PUD/TR/0119/1/2/EN 2012-08-13
User Manual
Cordless Phones for BusinessPhone™
60
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select “Display”.
4 Select “Brightness”.
5 Select “Normal” or “Power save”.
6 Press "Back".
Contrast
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select “Display”.
4 Select “Contrast”.
5 Step with to increase and to decrease the contrast.
6 Press "Back".
8.8.4 Time & Date Settings
The time and date are received from the DECT system. If the time and date are
changed in the system, it takes up to 24 hours before the changes appear in the
handset. If the handset is turned off and then turned on, the changes will be applied
immediately.
However, it is possible to change the format of the time and date.
Set Time Format
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select "Time & Date".
4 Press "Select".
5 Select Time format. The actual time format will be displayed. Selectable time
format:
• 12:00 (AM/PM)
• 24:00
6 Press "Select" to save the setting.
Set Date Format
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select “Time & Date”.
4 Press "Select".