2 divert internal /external calls, 3 internal/external follow-me – AASTRA DT4x3 for BusinessPhone User Guide EN User Manual
Page 49
AMT/PUD/TR/0119/1/2/EN 2012-08-13
User Manual
Cordless Phones for BusinessPhone™
43
7
Enter time (HHMM) or date (MMDD) depending on the selected absence reason.
8
Press "OK".
The handset sends an absence reason code to the system by establishing a call. The
call will automatically be disconnected after a few seconds.
Note
: The following procedure can also be used: Press*23* enter the Absence code (0-
9) Press *,
enter time or date of return (MMDD/HHMM), if requested, Press # and
press
and
, (U.S and Canada, Press *24*).
Deactivate the Absence Setting
1
Enter the menu by pressing the “Menu” soft key.
2
Select
in the menu.
3
Select "Call services".
4
Select "Absence"
13
.
5
Select “Deactivate”.
6
Press "Select".
Note:
Following procedure can be used to cancel Absence: Press: #23# and Press
and
(U.S:#24#)
8.2.2
Divert Internal /External calls
All calls to your extension can be diverted to an internal or external extension of your
choice.
1
Enter the menu by pressing the “Menu” soft key.
2
Select
in the menu.
3
Select "Call services".
4
Select "Divert calls"
9
5
Select "Internal" or "External".
6
Select "Activate".
7
Enter number to divert to, or press the soft key
to enter the call contact list.
8
Press "OK"
The handset sends a diversion reason code to the system by establishing a call. The
call will automatically be disconnected after a few seconds.
To stop diversion select "Deactivate" and press the soft key "OK".
See also 8.2.4 Internal Follow- me and 8.2.5 External Follow- me.
Cancel Diversion
To stop diversion
1
Select "Deactivate".
2
Select the Confirmation button or "OK"
8.2.3
Internal/External Follow-me
Internal Follow-me:
9.Only visible if diversion reason codes are defined in handset via WinPDM/CPDM3.