AASTRA Office 35IP User manual - Manual (Page 63)

Installation and First-Time Operation
63
Installation and First-Time Operation
Putting Your Phone into Operation
Note: Plug designs vary from country to country.
Connecting your handset to the phone
1. Plug the connector at the rippled end of the handset cord into the socket near the handset's voice
microphone.
2. Plug the connector at the loose end of the cord into the small socket on the underside of the phone.
Connecting your phone to the LAN
Plug the connector of the LAN cord (not included in the scope of delivery) into the socket marked "LAN"
on the back of the phone
A PC can be connected with the Office 35IP in the same way. To do so, plug the connector of the phone
cord into the socket marked "PC" at the back of the phone and the other end into the PC's LAN socket.
Connecting the power supply
Use the enclosed plug-in power adapter to connect the phone to the power supply. If your LAN supports
Power-Over-IP the phone will be powered via the LAN cord and you will not need the power adapter.
Logging Your Phone on
Your system administrator has to prepare the system before you can log on your phone.
LAN PC