AASTRA Office 35IP User manual - Manual (Page 47)

Personalizing Your Phone
47
Changing your Personal Code
You want to change the personal code used for locking / unlocking your phone (see "Locking your
phone" and "Unlocking your phone").
The factory setting is digit combination "0000"; you can select any 2 to 10-digit combination for your
new code.
If you have forgotten your personal code, your system administrator can reset it to the factory setting.
Press the Menu key and hold it down for a moment.
The configuration mode is now activated.
Press the Menu key repeatedly until the display shows "Code".
Code Press the "Code" Foxkey.
The display shows "Old code:".
Use the digit keys to enter the current code.
For each digit entered, the display shows an "*".
OK Press the "OK" Foxkey.
The display shows "New code:".
Use the digit keys to enter the new code.
For each digit entered, the display shows an "*".
OK Press the "OK" Foxkey.
The display shows "Confirmation:".
Use the digit keys to enter the new code a second time.
For each digit entered, the display shows an "*".
OK Press the "OK" Foxkey.
The new code is stored.
☛
☛
☛