American Magnetics 05200PS-430-601 Integrated Power Supply System - Manual (Page 192)

174 Rev. 5
Appendix
Remote Computer Communication (RS-232)
discharge using a unipolar supply. The process was described earlier in
section A.12.3 on page 171; (Figure A-3 is repeated here for convenience):
A.13 Remote Computer Communication with the Model 430
A.13.1 Communication via RS-232
1. Using serial a null modem cable, connect the DB9 RS-232
connector on the rear of the Model 430 Programmer to a serial
connector on the computer.
2. Start a terminal
emulator program on
the remote computer.
As an example, this
procedure will use the
HyperTerminal
program running on a
Windows machine.