1 entering / exiting setup menu, 2 menu navigation, 10 setup submenu descriptions – American Magnetics 05100PS-430-601 High Stability Integrated Power Supply System User Manual

Page 64: D 3.10, Operation

Rev. 5

Operation

Setup Menu : Entering / Exiting

3.9.1

Entering / Exiting Setup Menu

To enter the setup menu, simply press the

key. When in any of the

setup menus, pressing the

key will exit the setup menu. The

key toggles the Model 430 Programmer in and out of setup mode.

Alternately, if the top level setup menu is being displayed, pressing the

ESC

key exits the setup menu.

3.9.2 Menu

Navigation

Pressing the MENU key enters the menu structure at the top level. The

display will look approximately as shown below:

The item selector ( ) points to whichever submenu was last used. The left

and right arrows at the ends of the displayed submenu selections indicate

that there are other submenu selections off screen, to the left and/or right

of the submenu selections shown.

The left and right keypad arrows (to the left and right of the

key)

move the item selector between the different submenu items. Pressing the

left keypad arrow moves the item selector one item to the left and pressing

the right keypad arrow moves the item selector one item to the right.

When the last item is reached, and the right keypad arrow is pressed, the

item selector will move to the first item. Likewise, when the item selector

is pointing to the first item, and the left keypad arrow is pressed, the item

selector will move to the last item.

Pressing the

ENTER

key opens the submenu to which the item selector is

pointing when the

ENTER

key is pressed. See sections 3.10.1 on page 47

through 3.10.5 on page 74 for detailed descriptions of each submenu.

Pressing the

ESC

key exits a submenu and moves the next higher level

submenu if it exists. If the top level setup menu is being displayed,

pressing the

ESC

key exits the setup menu.

3.10 Setup Submenu Descriptions

When a submenu is entered by selecting a submenu item and pressing

ENTER

(see section 3.9.2 on page 46 for details of menu navigation), the

+0.00 A - Setup Mode (Select one)

+0.50 Vs

Supply

Load

Misc