A.4 current transducer power connector, Table a-4, Current transducer power connector pin definitions – American Magnetics 05100PS-430-601 High Stability Integrated Power Supply System User Manual
Page 172: Appendix, Power
154
Rev. 5
Appendix
Curremt Transducer Connectors
A.4
Current Transducer Power Connector
Caution
Operating the system without power applied to the current
transformer (CT) can will result in loss of control, and will probably
damage the CT.
The current transducer power connector provides pins for connection of the
CT power supply. The connector is an 8-pin female DIN connector with the
shell lugs connected to the Model 430 Programmer chassis ground. The
pins that receive the power into to the Model 430 are wired internally to
the current transducer signal connector for powering the CT.
7
V out -
8
not used
9
power +15 volts out
Table A-4.
Current Transducer Power Connector Pin Definitions
Pin
Function
1
not used
2
not used
3
not used
4
not used
5
common
6
-15 volts in
7
+15 volts in
8
common
Table A-3.
Current Transducer Signal Connector Pin Definitions
Pin
Function
POWER