SUUNTO Cobra - Manual (Page 54)

52
4.3.3. SETTING PREFERENCES
[3 SET PREF]
To enter the Setting Preferences Mode select MODE- 3
SET- 3 SET PREF. The Setting Preferences mode has
three options: 1 Light, 2 Units and 3 Model.
4.3.3.1. BACKLIGHT SETTING [1 LIGHT]
In the Backlight Setting mode the backlight can be
turned off or on and the on time can be set to be 5 to
30 seconds (Fig. 4.31.).
To enter the Backlight Setting Mode select MODE- 3
SET- 3 SET PREF- 1 LIGHT.
NOTE! When the backlight turned OFF, it does not
illuminate when an alarm is given.
4.3.3.2. DIVE COMPUTER UNITS SETTING
[2 UNITS]
To enter the Dive Computer Units Setting mode, select
MODE- 3 SET- 3 SET PREF- 2 UNITS. This will
enable you to choose between metric and imperial
units (Fig. 4.32.).
4.3.3.3. DIVE COMPUTER MODEL
SETTING [3 MODEL] - AIR/NITROX/
GAUGE
In the Dive Computer Model Setting mode the dive
computer can be set to be an AIR computer, NITROX
computer or a depth GAUGE with a timer (Fig.
4.33.).
To enter the Dive Computer Model Setting mode select
MODE- 3 SET- 3 SET PREF- 3 MODEL.
Fig. 4.33. Setting Dive Com-
puter model.
Fig. 4.32. Setting Metric/Impe-
rial units.
Fig. 4.31. Setting Backlight On
Time. Press scroll buttons to
change backlight on/off and to
set time value.
OK
TIME
OK
°C
° F
m ft
OK